Joint filler for tiles
Characteristics and purpose:
Fugalin is a highly waterproof compound, applicable for grouting ceramic, mosaic and stone tiles, both interior and exterior. It is used for wall and floor surfaces, where the joint width does not exceed 10 mm.
Fugalin is manufactured in various shades according to Maxima grouting color card.
Instructions for preparation and use:
add approx. 600 ml of water to fugalin bag content, mix it in a mixer and leave it to rest for 10 to 15 minutes. Repeat the mixing procedure and the grouting compound is ready for use. Open time is 2 hours.
Apply fugalin with a rubber skimmer at an angle to the joint direction, pressing it into the joints. Wait about 10 minutes after applying the compound, wipe the entire tiled surface using a fine sponge for grout joints, and finally polish the surface with a dry cloth. When using tiles that are very porous and coarse, before beginning, first check the cleaning instructions.
Sanitary cleaning agents can be used for maintenance.
Consumption:
depending on joint width and depth, as well as the tile format, from 0.5 to 1.0 kg/m².
After use, clean the tools immediately with water. Working temperature: +5°c to +30°c.
.
Shelf life:
12 months
Storage:
keep in original packaging in dry conditions.
Shade code marked on packaging
Packaging size:
2 kg.