Acrylic marble mosaic
Characteristics and purpose:
Colorplast is a ready-mixed decorative mosaic based on acrylite and marble grain with 2mm granulation. It adheres well to substrate, has good vapour permeability and is resistant to at-mospheric agents and uv radiation. It is intended for protection and decoration of exterior and interior wall surfaces. It is produced according to colorplast shade chart in 24 shades.
Application mode:
Substrate onto which colorplast is being applied must be dry, even, hard and clean. Prime sur-faces with maxikril hydrosol primer. In light shades apply rologrund, according to manufacturer’s instruction, avoiding in this way generation of shadows. Stir colorplast prior to applying until foam generates and as such it is ready for use. Apply manually, with stainless steel plasterer’s float in thickness of approximately 3mm. Remove excess material by steel plasterer’s float and finish up, taking care that there is gap between grains. In normal conditions protect freshly ap-plied surfaces against atmospheric impacts for minimum 24 hours. Wash tools with water im-mediately after use.
Application temperature:
Optimum application temperature is from +10°c to +30°c, and the product must not be used at workingtemperatures below +5°c, as well as during the rain, fog, strong sunshine and wind.
Consumption:
Thickness 2mm
Average 4.5kg/m2
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.