Water washable paint for interior walls
Characteristics and purpose:
Maxidis® is a quality dispersion paint for interior use. It is characterised with good adhesion to substrate, excellent coverage ability, vapour permeability, elastic resilience, hardness and resistance to wet wiping. It is intended for protection and decoration of the interior wall surfaces of concrete, flexible mortar, aerated concrete, asbestos-cement, chipboard... It is produced in white colour and as a base for shading in maxima mix system. Maxidis can be shaded with maxi colour to pastel shades or with maxifas colour according to “paints and plasters” shade chart, as well as in maxima mix system
Application mode:
Substrate onto which maxidis is applied must be hard, dry, clean and free of poorly bonded parts of dust, water-soluble salts, grease and other impurities. Remove mechanically old paint which is not well bonded, and skim uneven surfaces with gletolin or gletolin g. Prior to applying maxidis paint, impregnate walls with maxikril primer, according to manufacturer's instruction. Apply maxi-dis in two covering coats, whereat the paint can be diluted with water from 10% to 15%. The sec-ond coat, at optimum conditions, can be applied after 6 hours, and/or onto previously dried coat. Apply by brush, roller or spray device. Wash tools with water immediately after use.
Application temperature:
From +5°c to +35°c
Consumption:
0.2–0.3kg/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.