Façade paint – intensive shade
Characteristics and purpose:
Maxifas colour is a high-quality acrylite-based paint, light stable pigments and quality fillers. It is characterised with good adhesion to substrate, excellent coverage ability and good vapour permeability. In all climatic conditions it is resistant to impacts of atmospheric agents and uv radiation. Maxifas colour is used for protection and decoration of the interior and exterior surfaces (concrete, flexible mortar, chipboard, masonite), as well as for shading maxifas, maxipol and maxidis. Maxifas colour can be used as independent wall paint. It is produced in all shades according to “paints and plasters” shade chart. It is not recommended for painting fresh, yet un-carbonated lime and lime-cement substrates.
Application mode:
Substrate onto which maxifas colour is applied must be hard, clean and free of poorly bonded parts, dust, water-soluble salts and other impurities. Remove mechanically old paint which is not well bonded. Level larger uneven surfaces with gletolin s compound for skimming exterior walls. Prior to applying maxifas colour, impregnate walls with maxikril, according to manufacturer's instruction or with maxifas colour diluted with water in ration 1:1. Apply maxifas colour in two cov-ering coats, whereat the paint can be diluted with water up to 10% to 15%. The second coat, at optimum conditions, can be applied after 6 hours, and/or onto previously dried coat. Apply maxi-fas colour by brush, roller or spray device. Wash tools with water immediately after use.
Application temperature:
From +5°c to +30°c. Not to be applied during strong sunshine, wind, fog or rain.
Consumption:
0.3–0.5kg/m2 in two coats, depending on substrate roughness and absorption.
Shelf-life:
12 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight.