Silicate façade paint
Characteristics and purpose:
Maxifas ST is an environmentally friendly, high-quality façade paint, based on potassium glass, acrylic and silicone binder. It is characterised with very high alkaline resistance, very high vapour permeability, water impermeability, resistance to uv radiation and atmospheric agents. It is easily applied and adheres well to substrate. It is applied for decoration as finish coating of interior and exterior mineral surfaces. Due to its exceptional characteristics it is recommended for restoration of old buildings. It is produced in white colour and can be shaded in Maxima mix system, in shades recommended by manufacturer. Wash tools with water immediately after use.
Application mode:
Surfaces that are being coated should be free of dust grease, crumbly parts and old coatings. Prior to application of maxifas st, prime surfaces with maxisil st primer and dry for minimum 24 hours, and/or 48 hours depending on weather conditions. Apply maxifas-a st in two coats, whereat the paint can be diluted with water up to 10%, as necessary. The second coat can be applied after 12 hours depending on weather conditions, and/or to previously dried coat. Apply by roller or brush.
Application temperature:
From +10°c to +25°c. The product must not be used at working temperatures below +8°c.
Consumption:
0.3–0.4kg/m2 in two coats, depending on substrate preparation.
Shelf-life:
9 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight. Keep out of children's reach.