Silicate decorative plaster
Characteristics and purpose:
Rolosil ST is a quality ready-mixed silicate-based decorative plaster. It adheres well to substrate, has excellent vapour permeability and strength. It is resistant to atmospheric impacts and uv ra-diation. It is used for protection and decoration of exterior and interior mineral surfaces and finish coating in thermal insulation façades. Rolosil ST can be shaded in maxima mix system only in shades recommended by manufacturer.
Application mode:
Surface onto which Rolosil ST is being applied must be dry, even, hard, clean and previously im-pregnated with Maxisil ST (silicate primer), according to manufacturer’s instruction. Applied primer must be dried for minimum 24 hours, and/or 48 hours, depending on weather conditions. Prior to use, stir thoroughly Rolosil ST and as such it is ready for use. Rolosil ST shaded in Maxima mix system and Rolosil ST of different production batches and dates must be mandatory homogenized! Homogenization is carried out by mixing quantity of a few containers in a larger vessel and when homogenized quantity of approximately one container is used up, a new is added and mixed. It is applied by metal plasterer’s float in thickness of the largest grain. Finish-ing to be done by plastic flat plasterer’s float. In normal conditions protect freshly applied sur-faces against atmospheric impacts for minimum 24 hours. Wash tools with water immediately after use.
Application temperature:
Optimum application temperature is from +10°c to +25°c. The product must not be used at workingtemperatures below +8°c.
Consumption:
Thickness 1.5mm 2mm 3mm
Furrowed 2.7kg/m2 3.0kg/m2 3.6kg/m2
Smoothed 2.9kg/m2 3.3kg/m2
Shelf-life:
6 months in original, well closed and undamaged package at temperature from +5°c to +25°c, protected against direct sunlight. Keep out of children's reach.