Application mode:

Add 25kg of Stiromol alkaline into 6.5l of water and stir thoroughly. Leave it for 10 minutes, stir again thoroughly and compound is ready for use. Thus prepared glue should be used up within 2 hours. Apply Stiromol alkaline on thermal insulation panels (coverage with glue around 50%) and glue them on hard and clean substrate by pressing. After 2 to 3 days, additionally bolt with minimum 6 bolt anchors per m2.

Warning:

Use Stiromol alkaline only for gluing the styrofoam panels. The product is not intended for rein-forcing mash or to be finish coat.

Application temperature:

From +5°c to +30°c. The product must not be used during rain, fog, strong sunshine and wind.

Consumption:

From 3 to 5 kg/m2, depending on wall surface.

Shelf-life:

6 months in closed and undamaged package, in a dry and ventilated room.