Glue for styrofoam and reinforced plaster
Characteristics and purpose:
Stiromol elastic is a single-component, high-resilient dry type of construction glue, made of hy-draulic and synthetic binders. It is intended for gluing and reinforcing thermal insulation panels: styrofoam, thermoseal, vidaseal and stone wool, on all types of mineral substrates.
Application mode:
Add 25kg of Stiromol elastic into 6.5l of water and stir thoroughly. Leave it for 10 minutes, stir again thoroughly and compound is ready for use. Thus prepared glue should be used up within 2 hours. Apply Stiromol elastic on thermal insulation panels along edges and on 3-6 points in the middle of the panel (coverage with glue around 50%) and glue them on hard and clean sub-strate by pressing. We recommend bolting on glued thermal insulation panels after 2-3 days. Place reinforcing mash by sinking into layer of applied stiromol elastic, in thickness of 2–3mm, on already glued thermal insulation panels, with overlap of 10cm, and then level entire surface with Stiromol elastic. Protect fresh surfaces against rain and strong sunshine.
Application temperature:
From +5°c do +30°c. The product must not be used during the rain, fog, strong sunshine and wind.
Consumption:
From 3 to 5kg/m2 for gluing,
From 4 to 5kg/m2 for reinforcing.
Shelf-life:
6 months in closed and undamaged package, in a dry and ventilated room.